Beginner Question

andeecollard

@monomonnik thank you so much! Your second example looks really good. Could I use saved state to implement the bands of different line densities?

monomonnik

savedState() is just a way to change graphic properties without effecting the graphic state outside the savedState().

For example, the fill and stroke changes inside the savedState() aren’t reflected in the line that is drawn later.

fill(None)
strokeWidth(10)
stroke(0)

with savedState():
    fill(1,0,0)
    stroke(None)
    rect(0,0,.5*width(),height())

line((.75*width(),0),(.75*width(),height()))

So yes, you could draw three bands, and use translate to position them.

for i in range(3):
    with savedState():
        fill(random())
        translate(0, i/3*height())
        rect(0,0,width(),1/3*height())

(In this example, the savedState() is not necessary. However, if you are going to use translate to draw the lines, it’s nice that everything resets and you restart at (0,0) in the next step of the loop)

andeecollard

@monomonnik this has been very helpful. This is getting closer to what I wanted to do:

size(600, 849)

margin = 30
density = 3

fill(None)
strokeWidth(1)
stroke(0)


x = margin

while x < width()-margin:
    line((x,margin),(x,height()-500-margin))
    x += randint(0,density)
    line((x,margin),(x,height()-600-margin))
    x += randint(0,density)
    line((x,margin),(x,height()-200-margin))
    x += randint(0,density)
    line((x,margin),(x,height()-margin))
    x += randint(0,density)

I'd still like to dynamically change the number of bands, their start/finish points and density, but this is a lot better!
Thank you

monomonnik

Just for fun, my interpretation:

size(600, 849)

margin = 30
density = [3,2,7,20,12]
rows = len(density)
row_height = (height()-2*margin) / rows

fill(None)
strokeWidth(1)
stroke(0)

for i, d in enumerate(density):
    x = margin
    y1 = margin + i*row_height
    y2 = margin + (i+1)*row_height
    while x < width()-margin:
        line((x,y1),(x,y2))
        x += randint(0,d)

andeecollard

@monomonnik Very nice!

frederik

thanks @monomonnik! very well explained!

the while loop at the end makes its maybe a bit unreadable...

you can use random.sample to generate a random list easily:

import random

density = 5
result = random.sample(range(0, 100), density)
print(result)

monomonnik

@frederik Yes, I’m not a fan of while loops too. So, you would propose something like this?

import random

size(600, 849)

margin = 30
density = [.01, .1, .5, .9, .99] # percentage
rows = len(density)
row_width = width()-2*margin
row_height = (height()-2*margin) / rows

fill(None)
strokeWidth(1)
stroke(0)

for i, d in enumerate(density):
    y1 = margin + i*row_height
    y2 = margin + (i+1)*row_height
    total_lines = int(d * row_width)
    x_positions = random.sample(range(margin, margin+row_width), total_lines)
    for x in x_positions:
        line((x,y1),(x,y2))

monomonnik

Normally I would define a minimum and maximum distance. I wouldn’t know how to do that using random.sample().

size(600, 849)

margin = 30
# Density here is defined by minimum and maximum distance between lines
density = [[100,200],[10,60],[1,3]]
rows = len(density)
row_height = (height()-2*margin) / rows

fill(None)
strokeWidth(1)
stroke(0)

for i, d in enumerate(density):
    x = margin
    y1 = margin + i*row_height
    y2 = margin + (i+1)*row_height
    while x < width()-margin:
        line((x,y1),(x,y2))
        x += randint(d[0],d[1])

frederik

its all the same and very much based on coding flavours

different approach, similar result, here you know the amount of lines exactly.

import random

size(600, 849)

margin = 106
density = [3,2,7,20, 1002] # the amount of lines
rows = len(density)
row_width = width() - 2 * margin
row_height = (height() - 2 * margin) / rows

fill(None)
strokeWidth(1)
stroke(0)

for i, d in enumerate(density):
    y1 = margin + i * row_height
    y2 = y1 + row_height
    x_positions = [random.random() * row_width for _ in range(d)]
    for x in x_positions:
        line((x, y1),(x, y2))

monomonnik

y2 = y1 + row_height

Yes, I should have seen that. So much clearer.

x_positions = [random.random() * row_width for _ in range(d)]

I understand what’s happening here, but I don’t think I’m experienced enough to think this is more readable than the while loop.

I agree it is the better solution as it obviates the while loop.

Thanks @frederik